GEAppliances PFE28P, Руководство пользователя и инструкции по установке

Страница: 19 / 21

*Select Models Only
Problem Possible Causes What to Do
Beverage quality not as expected You may be using non-standard or
out dated K-Cups
Recommend using official Keurig K-cups
that are not past expiration and have not
been damaged
Liquid drips from the brewer after
brewer cycle is completed and the
brewer is removed from the bracket
It is possible for liquids to be retained
by the brewer and drip when it is
removed
Use a cloth or container to capture the
drips when brewer is removed
Delay when using Keurig K-cup Pod
dispenser
To ensure a quality beverage is
delivered, a short delay is required to
ensure the refrigerator is operating
correctly
Ensuring consistent, quality operation
requires the refrigerator to delay dispense
for a short period of time
After brewing, my powdered beverage
is not fully cleared from the used pod
Depending on size selected, the
powder may not dissolve fully. Some
powdered beverages develop into
‘clumps’ when left sitting for some
time
Shake the powdered pods before brewing
to break up these clumps and allow better
clearing. For powdered beverage with no
filter, use the Cocoa cycle selection
Brewer lid is difficult to close K-cup is not fully seated Press K-cup all the way down into the
brewer prior to closing the lid. Lower
needle must puncture K-cup bfore closing
the brewer lid
Brewer leaks during the brew cycle Trouble in closing brewer lid or
damaged K-cup
Press K-cup all the way down into the
brewer prior to closing the lid. Lower
needle must puncture K-cup bfore
closing the brewer lid. Recommend using
official Keurig K-cups that have not been
damaged and have a good seal between
the top cover and plastic bottom
Troubleshooting Tips (cont)
Before you call for service
111