To Use HANDS FREE AUTOFILL:
Center container on Recess Dispenser Tray as far back as
possible without activating paddle and remove hand from
container
Press
AUTOFILL
To Stop AUTOFILL
Press
AUTOFILL
to stop.
Important Facts about AUTOFILL
For optimum results, use a uniform container between
4-8 tall and 2-6 wide.
Fill level and functionality may vary on containers taller
than 8 or wider than 6.
Container volumes may vary, if error message Not Found
is given, try a different container.
AUTOFILL will time out.
Handles, straws, and garnishes on the rim of the container
my cause overfilling or variation in fill volumes.
Splashing may occur depending on the location of the
container, water flow rate, container shape, and ice cubes.
Keep sensors clean with a clean damp cloth, and do not
spray liquid or cleaners directly on sensors
AUTOFILL works best with household water pressure of 60
to 100 psi.
Ice in container may affect fill volume. If issues are
experienced, use less ice.
About Autofill.*
Sensors
*Select Models Only
About the K-Cup Brewing System.
*
Scalding Hazard.
The water coming from the dispenser is very hot and can
cause scalds or burns.
Read all warnings on page 4 prior
to use.
Do not permit children to use the brewer.
Always use a container that is suitable for hot liquids
(ceramic, foam, etc.)
Do not brew into a mug made of glass. Doing so may
cause the glass to crack or break.
If you live above 5000 feet, press
Fridge
and
Door
Alarm
and control will cycle from Low Altitude (Lo AL) to High
Altitude (Hi AL).
DO NOT use the hot water dispenser immediately after
installing a new water filter as it may result in spurting
of hot water. Dispense cold water for about 5 minutes to
purge air from the system prior to dispensing hot water.
Important Facts about HOT WATER
099
