GEAppliances PermaTuf GLD28**V, Техническое обслуживание руководство

Страница: 22 / 40

– 22 –
Stainless Steel Tub Models
To remove the vent:
1. Remove the outer door panel. (See
Outer Door
Panel (Stainless Steel Tub Models).)
2. Remove the vent foam from the vent.
Note: When installing the vent foam, position it so
the rear vent slot is on the bottom.
3. Remove the 2 Phillips-head screws holding the
duct to the vent body.
4. Remove the 4 Phillips-head screws holding the
vent body to the inner door panel.
Vent Slot
To remove the inner vent:
1. Remove the inner door panel. (See
Inner Door
Panel (PermaTuf Tub Models).)
2. Remove the vent foam from the inner door
panel.
3. Disengage the 3 tabs holding the vent to the
inner door panel.
Note: When installing the inner vent, insert the top
section fi rst.
Vent Foam
Vent Foam
Inner Vent