GEAppliances PermaTuf GLD28**V, Техническое обслуживание руководство

Страница: 19 / 40

– 19 –
Note: When removing or installing the control board
cover, remove or insert the lip under the console.
3. Disconnect the 4 wiring harnesses from the
control board.
4. Remove the single Phillips-head screw from the
center of the control board.
Note: When replacing the control board, transfer the
model select plug to the new board.
Disconnect
Disconnect
Disconnect
Model Select Plug
Note: Be sure the insulator is placed on the console
before installing the control board.
Insulator
Lip
3. Remove the 2 Phillips-head screws that hold the
tactile switch to the console.
Note: The tactile switch buttons are keyed to fi t in
the proper place on the silicone pad.
Tactile Switch
The tactile switch includes a silicone pad to protect
the switch from moisture. The buttons and silicone
pad come as an assembly.
To remove the tactile switch:
1. Disconnect the tactile switch wire harness from
the control board. (See
Control Board.)
2. Disengage the switch wire harness tie from the
console.
Tactile Switch Buttons
Silicone Pad