GEAppliances JP28, Инструкция по использованию и уходу

Страница: 13 / 36

To Set Clink
The
clock
must be set for the automatic oven
❑
1. Press the pad.
timing functions to work properly. The time of day
cannot be changed during a Timed Baking or Self-
CLOCK
Cleaning cycle.
2.
the
or
pad to set the time of day.
To Set
The timer is a minute timer;
❑
1. the
it does not control oven operations.
The maximum setting on the timer
is 9 hours and 55 minutes.
2. Press the
or DECREASE pad
to set the amount of
time on the timer.
The timer will automatically
within a few* of the
as you setting
one minute is -m.
Then it display minutes and
seconds until @minutes is-heal.
it hours
now
display) and
minutes until the maximum time of
9 hours and 55 minutes is -heal.
To Reset
To Cancel
press the
Press and hold the pad until the
pad until desired time is reached.
word disappears the
If is not press the
ON/0= pad then the instructions above
to set the timer.
End of Cycle Tone
The end of cycle tone is a series of three beeps in LOCK
followed by one&p every six seconds. If you would
and the oven control you set the self-clean
like to remove the signal that beeps every six seconds,
cycle and did not shut the door.
press and hold the C pad for 10 seconds.
●
in the oven
To
return the signal that every six seconds,
door is open and to be closed.
press hold pad for 10 seconds.
the
oven door is in the locked position. BAKE,
and COOK
cannot be set if the door is in the
locked
position.
Power
After a power outage, when power is restored, the
The display flashes until clock is reset. other
display will flash and time shown will no longer be
functions that were in operation when the power went
after a 5-minute power out will have to be programmed again.
clock will be 5 minutes slow.
13