1. Before placing range the counter, notice the
location of the stability bracket which is
attached to the back of the range. This location
should work for most instigations. However, it may
be more convenient to hook the
chain to
the unit when the stability bracket is
to
the upper set of holes in the back of the range.
Fig. A. The upper level set of holes are
for
use with a backsplash
If the backsplash is not
being used, make sure that there are no
supports for the countertop which will interfere
with the
bracket when located in the
upper set of holes,
Chain
2.
one end of
the stability chain to
the floor or
with
the long screw and
washer supplied. See
Fig. B. Make certain
the screw is going
into the
plate at
Chain
and
.
the base of
or one of the studs in the base
of the wall.
Fig. C.
you
the
chain to the
or floor, be certain that the screw
is in
at least 3/4 inch thickness of
other
baseboard and that there are no electrical wires or
plumbing in the area which the screw could
penetrate. Attach the
chain in a location
which will allow the chain to be in line with the
bracket side to aide as much as possible when
to the unit. Test to
if the chain is
securely
by tugging on the chain.
3.
attach the loose end of the chain
to the rear of the countertop with the tape
the
Fig. D.
4. Place the range in
counter cutout leaving just
between the back of the
and
reach the stability bracket,
5. Hook the loose end of the chain onto the bracket
slipping the nearest link of the chain into the
slot the bracket. See Fig. A and make sum the
chain is palled as tight as possible and that there
is no
slack in
chain after the chain is
attached to the bracket.
A
in
over.
6.
Slide the range
the way back into the counter.
Once the range is
in
there will
be a small
slack in the
This
is
/ / /
.
m
. attaching to masonry, you can buy suitable screws
and anchors at hardware stems. Use a masonry
to drill the
holes.
.
If
range is removed for cleaning or any other reason,
make sure chain is reattached.
3 2
—
Содержание JP28
Страница 6: ...FEA s OF YOm UGE Models JSP26 JSPm JSP31 JSP34 IL I 6 ...
Страница 34: ...PROBLEM t SS LE CAUSE 34 ...