GEA VARIVENT D Series, Руководство по эксплуатации

Страница: 13 / 78

Only allow specially trained personnel to carry out work on an explosion-
protected system. When working on explosion-protected equipment observe the
standards DIN EN 60079-14 for gases and DIN EN 50281-1-2 for dusts.
The following minimum qualifications are required:
•
Training as a specialist for working independently on the component.
• Adequate instruction to work on the component under the supervision and
guidance of a trained specialist
Each employee must meet the following requirements to work on the component:
• Personal suitability for the respective task.
• Sufficient professional qualification for the respective task.
• Received instruction about the functionality of the component.
• Received instruction about operating sequences on the component.
•
Familiar with the safety devices and their function.
• Familiar with these Operating Instructions, especially with the safety
instructions and the information which is relevant for the task on hand.
•
Familiar with the basic regulations with regard to occupational health and
safety and accident prevention.
When working with the component, a distinction is made between the following
user groups:
Safety
Qualification of personnel
430BAL008360EN_5
07.02.2022 13