GEA VARIVENT D Series, Руководство по эксплуатации

Страница: 49 / 78

Hint!
GEA Tuchenhagen recommends Rivolta F.L.G. MD-2 and PARALIQ
GTE 703. These lubricants are approved for foodstuff and are resistant
to beer froth. They have the NSF-H1 (USDA H1) registration. They do
not affect the taste or the consistency of the products and are
compatible with the seals in contact with product.
Rivolta F.L.G. MD-2 can be ordered from GEA Tuchenhagen. Using
other types of grease can result in malfunctions or in premature seal
failure. The warranty will also become null and void.
A Manufacturer's Declaration for these products can be obtained from
GEA Tuchenhagen if required.
A thin film of grease is required on the seals to ensure the proper
function of the fittings. It reduces friction and extends the service life
of the seals. This is absolutely harmless from a health and hygienic
point of view.
Running dry must be avoided!
10.7 Installation
Assemble the valve in reverse order of disassembly. Observe the notes and
instructions given in the following sections when doing so.
10.7.1 Spring
Fig.22
Before the spring is placed into the cleaning hood, both surface ends must be
greased.
10.7.2 Cleaning hood
Fig.23
When assembling the cleaning hood, the following instructions must be followed:
Maintenance
Installation
430BAL008360EN_5
07.02.2022 49