manualshive.com logo in svg

GE XMO2, Руководство пользователя

Поделиться
Скачать
GE XMO2 Скачать руководство пользователя страница 134

Advanced Programming

7-19

September 2007

DRIFTCAL HANDLER 
Option (cont.)

The 

Set Max Drift/Cal

 option (cont.):

You may now do one of the following:

•

Press 

[N]

 as many times as necessary to select another 

DriftCal 

Handler 

menu option. Then, press 

[Y]

 and proceed to the 

appropriate section of this chapter for instructions.

•

Press 

[N]

 until you reach the 

Done?

 option of the 

DriftCal Handler

 

menu, then press 

[Y]

 to return to the 

Calibrate System

 menu.

The 

Done

 option:

The 

Done?

 option returns the XMO2 to the 

Calibrate System

 menu 

from the 

DriftCal Handler?

 submenu. To use this option, refer to the 

menu map in Figure C-8 on page C-8 and press 

[N]

 until the following 

prompt appears.

You may now do one of the following:

•

Press 

[N]

 as many times as necessary to select another desired 

DriftCal Handler?

 option. Then, press 

[Y]

 and proceed to the 

appropriate section for instructions.

•

Press 

[Y]

 to leave the 

DriftCal Handler?

 submenu and return to the 

top level of the 

Calibrate System 

menu.

Max % Drift per Cal:

To accept the current value, press 

[Y]

 or 

[Enter]

. To change the 

current value, use the numeric 
keys to enter a new value and 
press 

[Y]

 or 

[Enter]

 twice.

%F.S. [xx]

DRIFTCAL MENU

Press 

[N]

 until this prompt 

appears, then press 

[Y]

 or 

[Enter]

.

Set Max Drift/Cal?

DRIFTCAL MENU

Respond as indicated below.

Done?

Содержание XMO2





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды