manualshive.com logo in svg

GE XMO2, Руководство пользователя

Поделиться
Скачать
GE XMO2 Скачать руководство пользователя страница 133

September 2007

7-18

Advanced Programming

DRIFTCAL HANDLER 
Option (cont.)

The 

Set Max Total Drift

 option:

The 

Set Max Total Drift?

 option is used to specify the maximum 

allowable total calibration drift, as a percentage of the full-scale 
reading (25% of F.S. is the default value). If a calibration results in a 
total drift greater than the value specified, an error condition occurs. 
To use this option, proceed as follows:

Note:

If the XMO2 displays a value greater than 25% of F.S. after 
reaching equilibrium, change the maximum total drift value to 
50% before calibrating the unit.

You may now do one of the following:

•

Press 

[N]

 as many times as necessary to select another 

DriftCal 

Handler 

menu option. Then, press 

[Y]

 and proceed to the 

appropriate section of this chapter for instructions.

•

Press 

[N]

 until you reach the 

Done?

 option of the 

DriftCal Handler

 

menu, then press 

[Y]

 to return to the 

Calibrate System

 menu.

The 

Set Max Drift/Cal

 option:

The 

Set Max Drift/Cal?

 option is used to specify the maximum 

allowable drift per calibration, as a percentage of the full-scale 
reading (10% of F.S. is the default value). If a calibration results in a 
drift change greater than the value specified, an error condition 
occurs. To use this option, proceed as follows:

Note:

If the XMO2 displays a value greater than 10% of F.S. after 
reaching equilibrium, change the maximum Drift/Cal value to 
25% before calibrating the unit.

DRIFTCAL MENU

Press 

[N]

 until this prompt 

appears, then press 

[Y]

 or 

[Enter]

.

Set Max Total Drift?

Max % Total Drift:

To accept the current value, press 

[Y]

 or 

[Enter]

. To change the 

current value, use the numeric 
keys to enter a new value and 
press 

[Y]

 or 

[Enter]

 twice.

%F.S. [xx]

DRIFTCAL MENU

Press 

[N]

 until this prompt 

appears, then press 

[Y]

 or 

[Enter]

.

Set Max Total Drift?

DRIFTCAL MENU

Press 

[N]

 until this prompt 

appears, then press 

[Y]

 or 

[Enter]

.

Set Max Drift/Cal?

Содержание XMO2





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды