GE VersaSafe VersaPoint IC220SDL840, Руководство пользователя, Страница: 66 / 122

6
Typical parameterization
According to the "Value range of switch-off delay for stop category 1" and "Switch-off delay
for stop category 1" parameters, in this example, the switch-off delay is 30 x 1 s = 30 s.
Short circuit
Output to 24 V (for version A in
Figure 6-3 on page 6-9) Yes Yes No Prevent this error, e.g., through protected cable
installation.
Output to 24 V (for version B in
Figure 6-3 on page 6-9) Yes Yes Yes Prevent this error, e.g., through protected cable
installation.
Output to ground Yes Yes No Protect the output against damage using a preconnected fuse.
Clock output/alarm input to 24 V Yes Yes No The error is detected by clocking or by the plausibility check.
Clock output/alarm input to ground Yes Yes No The error is detected by clocking or by the plausibility check.
Table 6-7 Two-channel with monitoring by the alarm input [...]
Error type Detection Diagnostics Loss of
SF
Remark
Table 6-8 Two-channel with monitoring by the alarm input; typical parameterization
Parameterization Parameterized as Remark
Channel 1 Channel 2
Assignment Used Used
Output Two-channel Two-channel
Alarm input IN1 Evaluate Evaluate Or do not evaluate
Alarm input IN2 Do not evaluate Do not evaluate Or evaluate
Switch-off delay for stop category 1 Enabled Enabled Or disabled
Switch-off delay for stop category 1 30 30 Application-specific
Value range of switch-off delay for stop category 1 Value in s Value in s Application-specific
Enable (VersaSafe only) Enabled Enabled Or disabled
6-12 User manual IC220SDL840 -
May 2018
GFK-2734