Beginning an Exam
Versana Essential
–
User Guide
1-49
5759238-100 English
Rev. 2
Scanning without entering any patient data
To scan a patient without entering any patient data until the end
of the exam:
1. Scan the patient and save images to clipboard without the
patient information, the system displays a Warning
message, “A patient must be selected for permanent
storage of images.” Select
OK
, a warning message is also
displayed at the bottom of the image monitor in red.
2. When the scanning is finished, press
Patient
to display the
Patient Search screen.
3. Enter the Patient ID, patient data and exam information as
necessary, select
Register
.
4. If images or measurements have been stored to the
clipboard, the system will display the following message:
“Unsaved images, measurements or fetus number will be
linked to the current patient information, continue?” Press
OK
if you want to permanently store the images/
measurements that were just taken.
5. Enter the Active Images Screen, select
Permanent Store
.
6. Return to patient page, select
New Patient
.
Ending a Patient
To end a patient:
Press
Patient
->
New Patient
, then select
Store All
in the
pop-up menus to store exam data.
