Getting Started
1-48
Versana Essential
–
User Guide
5759238-100 English
Rev. 2
Entering a Patient List
All patient information can be entered before starting an exam.
1. Press
Patient
to display the Patient Screen.
2. Press
New Patient
to erase the current patient data.
3. Select
Store All
if data from previous patient was not saved.
4. Enter the Patient ID.
5. Enter the patient and exam information.
6. Press
Register
.
7. Repeat above steps as required.
Select the patient from the Patient List. Select
Resume Exam
to
continue the last exam that was performed on the selected
patient.
Select
New Exam
to start a new exam on the selected patient.
Starting a new exam on an existing patient
1. Select
Patient
on the control panel.
2. Select the patient from the Patient List.
3. Select
New Exam
.
4. A new exam is created. Enter the data and begin the scan.
