GE UVD-EVRDNR(-P) Скачать руководство пользователя страница 2

Copyright

 

© 2009 GE Security, Inc. 

This document may not be copied in whole or in part or otherwise reproduced without prior 
written consent from GE Security, Inc., except where specifically permitted under US and 
international copyright law. 

Disclaimer

 

The information in this document is subject to change without notice. GE Security, Inc. 
(“GE Security”) assumes no responsibility for inaccuracies or omissions and specifically disclaims 
any liabilities, losses, or risks, personal or otherwise, incurred as a consequence, directly or 
indirectly, of the use or application of any of the contents of this document. For the latest 
documentation, contact your local supplier or visit us online at www.gesecurity.com. 

This publication may contain examples of screen captures and reports used in daily operations. 
Examples may include fictitious names of individuals and companies. Any similarity to names 
and addresses of actual businesses or persons is entirely coincidental. 

Trademarks and patents

 

GE and the GE monogram are trademarks of General Electric Company. The UltraView name 
and logo are trademarks of GE Security. 

Other trade names used in this document may be trademarks or registered trademarks of the 
manufacturers or vendors of the respective products. 

Intended use

 

Use this product only for the purpose it was designed for; refer to the data sheet and user 
documentation for details. For the latest product information, contact your local supplier or visit 
us online at www.gesecurity.com. 

FCC compliance

 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction manual, may cause harmful interference to radio 
communications. 

You are cautioned that any changes or modifications not expressly approved by the party 
responsible for compliance could void the user ’s authority to operate the equipment. 

Certification and compliance

 

 

European Union directives 

1999/5/EC (R&TTE directive): 

Hereby, GE Security declares that this device is in compliance with 

the essential requirements and other relevant provisions of Directive 1999/5/EC. 

 2002/96/EC 

(WEEE 

directive): 

Products marked with this symbol cannot be disposed of as 

unsorted municipal waste in the European Union. For proper recycling, return this product to 
your local supplier upon the purchase of equivalent new equipment, or dispose of it at 
designated collection points. For more information see: www.recyclethis.info.

 

 2004/108/EC 

(EMC 

directive): 

Non-European manufacturers must designate an authorized 

representative in the Community. Our authorized manufacturing representative is: 

GE Security B.V., Kelvinstraat 7, 
6003 DH Weert, The Netherlands.

 

Contact information

 

For contact information see our Web site: www.gesecurity.com. 

For contact information see our Web site: www.gesecurity.eu. 

Содержание UVD-EVRDNR(-P)





















Отзывы: