GE RSTi-EP Скачать руководство пользователя | Manualshive

Страница: 3 / 76

background image

Legal Information

Warnings, Cautions, and Notes as Used in this Publication

Warning

Warning notices are used in this publication to emphasize that hazardous
voltages, currents, temperatures, or other conditions that could cause
personal injury exist in this equipment or may be associated with its use.
In situations where inattention could cause either personal injury or damage
to equipment, a Warning notice is used.

Caution

Caution notices are used where equipment might be damaged if care is
not taken.

Attention

Indicates a procedure, condition, or statement that should be strictly followed to
improve these applications.

Note:

Notes merely call attention to information that is especially significant

to understanding and operating the equipment.

These instructions do not purport to cover all details or variations in equipment, nor to provide for
every possible contingency to be met during installation, operation, and maintenance. The
information is supplied for informational purposes only, and GE makes no warranty as to the
accuracy of the information included herein. Changes, modifications, and/or improvements to
equipment and specifications are made periodically and these changes may or may not be reflected
herein. It is understood that GE may make changes, modifications, or improvements to the
equipment referenced herein or to the document itself at any time. This document is intended for
trained personnel familiar with the GE products referenced herein.

GE may have patents or pending patent applications covering subject matter in this document. The
furnishing of this document does not provide any license whatsoever to any of these patents.

GE PROVIDES THE FOLLOWING DOCUMENT AND THE INFORMATION INCLUDED THEREIN AS-IS AND
WITHOUT WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.

* Indicates a trademark of General Electric Company and/or its subsidiaries.

All other trademarks are the property of their respective owners.

Copyright © 2015 General Electric Company. All Rights Reserved

«
1
2
3
4
5
...
»

Содержание RSTi-EP













































































Отзывы:

Нет отзывов

Похожие инструкции для RSTi-EP

Бренд: Wave Italy Страницы: 16

Бренд: TA Hydronics Страницы: 14

Бренд: Eaton Страницы: 6

Бренд: Eaton Страницы: 100

Бренд: Gardena Страницы: 14

Бренд: Gardena Страницы: 4

GAT ACCESS 6100

Бренд: Gantner Страницы: 4

Бренд: Gatekeeper Страницы: 28

Бренд: Lamtec Страницы: 22

Бренд: olympia electronics Страницы: 10

Бренд: Vaillant Страницы: 12

Бренд: Fox Страницы: 5

Бренд: Warner Electric Страницы: 4

Бренд: Click2Enter Страницы: 34

Бренд: Ros Страницы: 10

Бренд: BEBE CONFORT Страницы: 90

Бренд: EFI Страницы: 127

Бренд: maxxess Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды