REPLACE THE OVEN DOOR
NOTE: The oven door is heavy. You may need
help lifting the door high enough to slide it
into the hinge slots. Do not lift the door by
the handle.
Lift the oven door by placing one hand on
each side. The door is heavy, so you may
need help. Do not lift the door by the
handle.
With the door at the same angle as the
removal position (halfway between the
closed and broil stop position), seat the
notch of the hinge arm into the bottom
edge of the hinge slot. The notch of the
hinge arm must be fully seated into the
bottom of the slot.
Open the oven door as far as it will open.
Push the hinge locks up against the front
frame of the oven cavity, to the locked
position.
Close the oven door.
E
D
C
B
A
15
11
Installation Instructions
REPLACE THE STORAGE
DRAWER
Place the drawer rail on the guides.
Push the drawer in until it stops.
Lift the front of the drawer and push in
until the stops clear the guides.
Lower the front of the drawer and push in
until it closes.
SPECIAL INSTRUCTIONS IF YOU ARE
HAVING PROBLEMS WHILE REPLACING
THE STORAGE DRAWER
Remove and replace, making sure the power
cord is not obstructing the drawer and/or the
rail is in the guide.
Remove and replace, making sure the rail is in
the guide.
D
C
B
A
16
Stop
Bottom edge
of slot
Hinge in
locked position
Notch of hinge
securely fitted
into bottom of
hinge slot
Drawer does
not close
completely
Drawer
front panel
tipped away
from body
side
Rear drawer
support is on top
of guide rail on
the high side
Drawer front panel
tipped to one side
Hinge arm
Hinge notch
If Drawer Won’t Close:
If Drawer is Crooked:
Power cord
may be
obstructing
drawer in
this area
Rear drawer
support is
resting on top
of guide rail
