manualshive.com logo in svg

GE PM880, Руководство по эксплуатации и установке

Поделиться
Скачать
GE PM880 Скачать руководство пользователя страница 74

Creating and Managing Sites

4-13

August  2003

Printing a Current Site

To print the current site from within the Site Manager, press 

[MENU]

 to open the File Menu. Then press the [

X

] arrow key 

once to scroll from the File Menu to the Site Menu. Scroll to the 
Print option, and press 

[ENTER]

. The PM880 shows a message 

indicating that its infrared sensor is looking for a receiving 
printer. (If the sensor spots no printer, a window appears 
indicating that it cannot find a device. If it spots more than one 
compatible infrared device within its range, it asks you to select 
the desired device.) If successful, the Site Manager window 
appears.

•

Press 

[F2]

 (No) to cancel printing, or

•

Press 

[F3]

 (Yes) to print the current site.

The PM880 returns to Operate Mode, while the printer prints out 
the current site.

Transferring a Site File to a PC

To upload a site file to a PC, you must have an infrared sensor 
connected to the PC that can receive data from the PM880 IR 
beam.

1.

Check that the Communications option on the PM880 (see 
page 6-14) has been set to the IrDA protocol, and that the IR 
beam on the PM880 has clear access to the IR sensor 
connected to the PC port.

Note:

For Windows NT 4.0, check that the QuickBeam

®

 

software (available through the path C:\Program 
Files\QuickBeam Suite) is running.  

2.

Highlight the desired site in the left window of the Site 
Manager.

3.

Press 

[MENU]

 to open the File Menu. Then press the  [

X

] 

arrow key once to scroll from the File Menu to the Site Menu. 
Scroll to the Transfer option, and press 

[ENTER]

.  

Содержание PM880


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды