PathSpeed CR User Manual
47
OI10026
Power consumption
Standby
• 230 V/ 50 Hz configuration
230 W
• 208 V/ 60 Hz configuration
227 W
• USA: 120 V/ 60 Hz configuration
216 W
• Japan: 100 V/ 60 Hz
220 W
During operation
• 230 V/ 50 Hz configuration
max. 1610 W
• 208 V/ 60 Hz configuration
max. 1470 W
• 120 V/ 60 Hz configuration (USA)
max. 1440 W
• 100 V/ 60 Hz (Japan)
max. 1500 W
Environmental requirements
Room temperature
15 °C - 30 °C
Maximum temperature change
0.5 °C/min.
Relative humidity
10 % - 75 %
Magnetic field (Dynamic)
compliant with EN 61000-4-8, Level 5
Sunlight exposure
not be operated in full sunlight
Warming-up time
• Cold start
fully operational after max. 30 min.
• Warm start
fully operational after self-test
if not switched off for more than 3 min.,
after 30 min. operation
Cassette format
corresponding IP format
24 x 18 cm
238 x 178 mm
30 x 24 cm
298 x 238 mm
35 x 35 cm
354 x 354 mm
35 x 43 cm
354 x 430 mm
30 x 15 cm
298 x 148 mm
12 x 10”
303 x 252 mm
2301 A UM GB ADC Solo.book Page 47 Monday, May 15, 2000 12:12 PM
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
