PathSpeed CR User Manual
33
OI10026
Re-erasing image plates with status ‘to be erased’
To re-erase an image plate which you have given the status ‘to
be erased’ via the ID station:
1
Check that the PathSpeed CR SP1001 is ready for operation:
•
the PathSpeed CR SP1001 must display the operator main
screen with ‘Ready’ status, e.g.:
•
the status indicator at the top of the PathSpeed CR SP1001 must
be green and be lit constantly.
2
Insert the cassette into the cassette
slot.
The PathSpeed CR SP1001 will automatically erase the image plate.
The display will read:
When the PathSpeed CR SP1001 has erased the image plate, it dis-
plays the operator main screen.
READY
ADC SOLO
Status
BUSY
* * * ERASING * * *
2301 A UM GB ADC Solo.book Page 33 Monday, May 15, 2000 12:12 PM
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
