manualshive.com logo in svg

GE Multilin MM300, Инструкция по эксплуатации

GE Multilin MM300 - электронный устройство, обеспечивающий надежную защиту и мониторинг системы электропитания. Имеет обширный функционал для обнаружения и предотвращения сбоев. Для полного понимания его возможностей, рекомендуется загрузить руководство пользователя бесплатно с manualshive.com. Особенно важно ознакомиться с инструкцией перед началом эксплуатации.

Поделиться
Скачать
background image

3–14

MM300 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL

GRAPHICAL CONTROL PANEL

CHAPTER 3: INTERFACING WITH THE MM300

The navigational soft keys change the numeric key in focus, which is highlighted in orange. 
There are also five functional soft-buttons in the popup window. 
•

BkSpc: This key performs the backspace function, clearing the last digit or decimal 
from the display.

•

CLR: This key clears the field’s value from the display

•

Default: This key returns the setpoint value to its default value.

•

OFF: This key disables the setpoint and is visible only for setpoints that can be 
disabled.

In order to activate the functions offered by these buttons, the user has to highlight the 
appropriate button and press "Select".
The 

UP

 and 

DOWN

 front panel keys can also be used to increment and decrement the 

setpoint by its step value. Clicking the 

ENTER

 key verifies the displayed value. If the 

setpoint value is valid, it is stored as the new setpoint value and the editor is closed. 
Otherwise, an error statement is displayed and the 

Default

 soft-button is brought to focus. 

Clicking 

HOME

 before the value is stored cancels the edit sequence and recalls the home 

page.
The following procedure describes how to edit a numeric setting.
1.

Use the navigation keys to select the relevant setting page.

2.

Use the navigation keys to select the relevant setting field.

3.

Press the 

ENTER

 key to open the numeric setpoint editor.

4.

Use the navigational soft-keys to highlight the first digit of the new setpoint value.

5.

Press the "Select" soft-key to select the highlighted digit.

6.

Use the navigational soft-keys to highlight the next digit, then press "Select."

7.

When the new value has been fully entered, press the "Enter" key to store the value 
and close the window.

Alphanumeric 

setpoints

Alphanumeric setpoints accept any alphanumeric value of a specified size and are 
generally used for labeling and identification purposes. When an alphanumeric setpoint is 
selected, the MM300 displays an alphanumeric setpoint editor window.

Figure 3-21: Alphanumeric setpoint editor

A flashing underline marks the current character. The “<” and “>” soft-keys shift the cursor 
left and right. When the cursor is at the extreme right hand side of the field and the field 
has not reached its maximum length of string input, the “>” key shifts the cursor to the 
right and sets the selected character to the space character. Up to 20 characters can be 
stored for alphanumeric setpoints. A long click of the “<” and “>” soft keys move the cursor 
to the first or last character in the string.
The up and down soft-keys increment and decrement the selected character through the 
character set. A long click of the up or down soft-keys sets the selected character to “a” 
and “Z”, respectively. The shift soft-key toggles the case of the character set. Pressing 

ENTER

 stores the selected value, while pressing 

ESC

 cancels the editing sequence and 

closes the popup editor.
The following procedure describes how to edit an alphanumeric setting.
1.

Use the soft-keys to select the relevant setting page.

Содержание Multilin MM300







































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Multilin MM300

Dakota Digital BIM-17-2 Manual preview
BIM-17-2
Бренд: Dakota Digital Страницы: 6
Dakota Digital CMD-2000 Series Manual preview
CMD-2000 Series
Бренд: Dakota Digital Страницы: 10
Z-Wave RC-100 Quick Setup Manual preview
RC-100
Бренд: Z-Wave Страницы: 6
Datavideo RMC-230 Instruction Manual preview
RMC-230
Бренд: Datavideo Страницы: 17
Datamax I-Class Installation And Operating Instructions Manual preview
I-Class
Бренд: Datamax Страницы: 22
LAIA TP-100 Administrator'S Manual preview
TP-100
Бренд: LAIA Страницы: 71
Samson 3354 Mounting And Operating Instructions preview
3354
Бренд: Samson Страницы: 40
Vanderbilt SPCN310 Installation Instruction preview
SPCN310
Бренд: Vanderbilt Страницы: 2
Eaton FC18 User Manual preview
FC18
Бренд: Eaton Страницы: 10
Idemia SIGMA Series Quick User Manual preview
SIGMA Series
Бренд: Idemia Страницы: 29
GEA SIMATIC C7-623 Instruction Manual preview
SIMATIC C7-623
Бренд: GEA Страницы: 13
Maximum Controls MAX ARM Installation And Owner'S Manual preview
MAX ARM
Бренд: Maximum Controls Страницы: 58
Paradox Esprit 727 Installation Instructions Manual preview
Esprit 727
Бренд: Paradox Страницы: 6
2gig Technologies Vario Installation Instructions Manual preview
Vario
Бренд: 2gig Technologies Страницы: 6
HEIDENHAIN ND 1300 Operating Instructions Manual preview
ND 1300
Бренд: HEIDENHAIN Страницы: 257
Acumen Model L Operating Instructions Manual preview
Model L
Бренд: Acumen Страницы: 6
PCB Piezotronics 482B06 Installation And Operating Manual preview
482B06
Бренд: PCB Piezotronics Страницы: 12
Skov DOL 535 Technical Manual preview
DOL 535
Бренд: Skov Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды