manualshive.com logo in svg

GE Monogram ZBD5600, Техническое обслуживание руководство

Поделиться
Скачать
GE Monogram ZBD5600 Скачать руководство пользователя страница 49

48

5.2.25.5   The hooked arm of the float can then be disen-
gaged from the float.  Refer to the photograph below
illustrating both the microswitch and float being lifted clear
from the sump.

Overfill microswitch

Undersump overfill float

Microswitch lever hooked in
undersump overfill float.

5.2.25.6  Reassemble the dishwasher in reverse order.

CAUTION. Test for water leaks before leaving.

5.2.25.7 Operate and test the dishwasher before leaving.

5.2.25  Undersump Overfill and Microswitch
Assembly Removal/Reinstall.

CAUTION. Switch off electrical power supply
and turn off water supply at main or
dishwasher shutoff.

5.2.25.1  Refer to Section 5.1 for access to the undersump
overfill and microswitch assembly.

5.2.25.2  Lift the overfill collector clear as shown below.

Overfill microswitch.

Overfill spillway.

Undersump overfill float.

Overfill collector.

5.2.25.3  The microswitch is held to the sump moulding by a
split headed captive pin retainer.  Refer to the picture below
of the split headed captive pin retainer being removed from
the microswitch/ sump with the aid of point nose pliers.

5.2.25.4   Upon the removal of the split headed captive pin
retainer, the microswitch and float can be lifted clear from the
guide rails of the sump.

Overfill

Split headed captive pin retainer being

microswitch

removed from microswitch mounting

Undersump overfill float.

Содержание Monogram ZBD5600









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды