GE Monogram ZBD1800K Series, Техническое обслуживание руководство

Страница: 21 / 46

– 21 –
7. Remove the nut and ground wire.
8. Remove the lock-washer and spacer bracket.
10. Lift up and remove the heating element from
the dishwasher.
9. Release the 2 heating element clamps.
Fill Funnel
The fill funnel is mounted on the left side of the
tub. Its purpose is to provide a method of
supplying water for the wash and rinse cycles.
The air gap prevents the siphoning of wash water
from flowing back into the water supply system,
should the water pressure drop to less than
atmospheric pressure. The fill funnel also allows
air into the tub to permit air flow for dish drying.
Removal and Replacement
1. Fold back the insulation surrounding the fill
funnel and air gap assembly.
2. Open the dishwasher door.
3. Rotate the fill funnel cap counterclockwise and
remove it from the fill funnel threads.
Heating Element
Turn CCW
Funnel Cap
Threads
4. Loosen the clamp, disconnect the fill funnel
hose, and remove the fill funnel.
Note: Make sure that the clear plastic air tube is
looped around that part of the fill funnel that
protrudes into the dishwasher tub and mates with
the fill funnel cap.
Fill Funnel Hose
Fill Funnel
Clamp
Ground Wire
Spacer Bracket
Lock-washer
Nut