GE Monogram ZBD1800K Series, Техническое обслуживание руководство

Страница: 27 / 46

– 27 –
6. Remove the clamp from the interconnect
hose that connects the sump to the wash
pump motor.
Sump Assembly
The sump assembly consists of the filter
assembly, micro-filter, sump clamping nut, sump
gasket, and sump. The filter assembly prevents
large particles from reaching the micro-filter, and
the micro-filter prevents small particles from
reaching the sump. The filter assembly rests
above the sump and the micro-filter sits above the
sump basin. The clamping nut holds the sump
gasket and sump to the bottom of the dishwasher.
The filter assembly, microfilter, and sump
clamping nut are accessed from inside the
dishwasher. The sump gasket and sump are
located under the tub in front of the motor pump
assembly.
Removal and Replacement
1. Disconnect power.
2. Carefully pull the dishwasher out from its
installation.
3. Remove the 4 screws, access panel, and toe-
kick panel from the dishwasher.
4. Remove the 10 screws and the right side
panel.
5. Remove the high-pressure switch hose from
the sump.
10. Remove the microfilter.
7. Remove the clamp from the hose that
connects the sump to the drain pump
assembly.
8. Open the dishwasher door and remove the
bottom rack (not shown).
9. Remove the filter assembly.
Shown with washer arm removed.
Microfilter
(Continued next page)
Shown with washer arm removed.
Filter
Assembly
Clamp
Interconnect
Hose
Clamp
Pressure
Switch Hose
Sump