GE LOGIQ C9 Series, Техническая публикация

Страница: 212 / 247

Care and Maintenance
10-6 LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
Maintenance task schedule
How often should maintenance tasks be performed?
The Care and Maintenance task schedule (provided in
Table 10-1
on page 10-6 ) specifies how often your LOGIQ C9
Series should be serviced and outlines items requiring special
attention.
NOTE: It is the customer’s responsibility to ensure the LOGIQ C9
Series care and maintenance is performed as scheduled in
order to retain its high level of safety, dependability and
performance.
Your GE Service Representative has an in-depth knowledge of
your LOGIQ C9 Series and can best provide competent, efficient
service. Contact GE for coverage information and/or price for
service.
The service procedures and recommended intervals shown in
the Care and Maintenance Task Schedule assumes that you
use your LOGIQ C9 Series for an average patient load (10-12
per day) and not use it as a primary mobile Ultrasound system
which is transported between diagnostic facilities.
NOTE: If conditions exist which exceed typical usage and patient load,
then it is recommended to increase the periodic maintenance
frequencies.
Table 10-1: Customer Care Schedule
Service at Indicated
Time Daily Weekly Monthly
Per
Facilities
QA
Program Notes
Clean Probes •* * or before each use
Inspect AC Mains Cable • Mobile Ultrasound
system: Check
Weekly
Inspect Cables and
Connectors •
Clean Console •