GE KTD-400 Скачать руководство пользователя страница 5

Страница: 5 / 28

Preface

This is the GE

KTD-400 Controller Keypad User Manual

for models KTD-400 and KTD-300R. This

document includes an overview of the product and detailed instructions explaining:

•

how to install and program; and

•

how to operate the KTD-400 and KTD-300R.

There is also information describing how to contact technical support if you have questions or concerns.

To use this document effectively, you should have the following minimum qualifications:

•

a basic knowledge of CCTV systems and components; and

•

a basic knowledge of electrical wiring and low-voltage electrical connections.

Read these instructions and all ancillary documentation entirely before installing or operating this product.
The most current versions of this and related documentation may be found on our website. Refer to

Online

publication library

on page 21 for instructions on accessing our online publication library.

Note:

A qualified service person, complying with all applicable codes, should perform all required hardware installation.

Conventions used in this document

The following conventions are used in this document:

Safety terms and symbols

These terms may appear in this manual:

Bold

Menu items and buttons.

Italic

Emphasis of an instruction or point; special terms.

File names, path names, windows, panes, tabs, fields, variables, and other GUI elements.

Titles of books and various documents.

Blue italic

(Electronic version.) Hyperlinks to cross-references, related topics, and URL addresses.

Monospace

Text that displays on the computer screen.

Programming or coding sequences.

CAUTION:

Cautions

identify conditions or practices that may result in damage to the equipment or other property.

WARNING:

Warnings

identify conditions or practices that could result in equipment damage or serious personal injury.

Содержание KTD-400





























Результаты поиска

Содержание KTD-400

Отзывы:

Похожие инструкции для KTD-400

Бренды по названию

Популярные бренды

GE KTD-400, Руководство пользователя

Результаты поиска

Содержание KTD-400

Отзывы:

Похожие инструкции для KTD-400

Бренды по названию

Популярные бренды