GE KTD-400, Руководство пользователя

Страница: 14 / 28

KTD-400 Controller Keypad
User Manual
10
System component configuration
After you have completed the KTD-400 keypad configuration, you can used the keypad to configure other
Digiplex system components. To configure these system components, begin at the normal operating display
and do the following:
To configure video switchers, alarm interfaces, and CyberDomes, press the appropriate number at the
component configuration selection menu (
Figure 21 ) and refer to the programming instructions provided with
those products.
To configure PTZ receivers, press 2 at the component configuration selection display ( Figure 21 ) and follow
the instructions in PTZ receiver configuration on page 11.
1. In the normal operating display shown in
Figure 19 , press and hold the Set key until
the display in Figure 20 appears.
Figure 19. Normal operating display
2. In the menu in Figure 20 , enter the access
code 9 , 5 , 1 , Seq . The next display will
appear.
Figure 20. Code entry display
3. The component programming selection
menu ( Figure 21 ) lets you select which
component (video switchers, PTZ receivers,
alarm interfaces, and CyberDomes) to
program.
Figure 21. Component configuration selection display
CAMERA 000
MONITOR 01
CAMERA 000 (CODE)
MONITOR 01 (----)
1=SWTCH 2=PTZ 3=ALRM
4=CYBER SEQ=EXIT