GE K0341, Руководство пользователя

Страница: 12 / 24

K0341 Issue No. 2 6
Operating Modes
Pressing switches the instrument on and the display shows
the start-up sequence. Pressing , at this time, the display
shows the information screen:
Pressing , at this time, the display shows the set-up screen:
The calibrator can be used in two modes measure or source .
Measure mode
The display shows the measured value; depending on the
settings made in set-up and advanced settings:
When measuring current pressing
enables linear or flow,
pressing enables mA or % (value of 4 to 20 mA or 0 to 20
mA).
When measuring voltage pressing
changes the resolution
between 0.00V and 0.000V.
To measure continuity the displays shows an open or closed
switch symbol with an audible signal on switch closure.
F1
F1
Serial number
VERSION
CAL. DATE
HART
BATTERY
Information
F2
F2
Resolution
adjust
F2
Contrast
adjust
F2
Range
4-20 mA/0-20mA
F2
Source unit mA/%
F2
Hart® ON/OFF
F2
Aut power down ON/OFF
F2
Decimal
. ,
/
F2
Access code
menu
F2
Calibration
menu
F2
F1
F2
F2