10
31-2000792 Rev. 0
Installation Instructions
5
ADJUST AIR SHUTTER (Cont.)
BAKE BURNER
A.
Use a screwdriver to loosen the air shutter screw.
1.
If the flames were yellow, open the air shutter
more than the original setting.
2.
If the flames blew away or fluttered from the
burner, close the air shutter more than the
original setting.
B.
Make the adjustment.
C.
Retighten the air shutter screw.
D.
Close the oven door and recheck the flame.
E.
When all adjustments are made and the results are
satisfactory:
1.
Replace the orifice fitting cover.
2.
5HSODFHWKHRYHQEDIIOHIODPHVSUHDGHU
3.
Replace the oven bottom.
5
ADJUST AIR SHUTTER (Cont.)
BROIL BURNER
A.
The broil burner is located and accessible in the top
rear of the oven.
B.
Use a screwdriver to loosen the air shutter
adjustment screw.
1.
Check air shutter to ensure it’s in the fully open
position and clear of any obstructions. For NG
application ensure that the regulator is in the NG
position. For LP applications ensure that the
hood has been tightened to the LP position.
2.
If the flames blew away or fluttered from the
burner, close the air shutter more than the
original.
C.
Make the adjustment.
D.
Retighten the air shutter screw.
E.
Close the oven door and recheck the flame.
SPECIAL NOTE:
To convert the oven back to natural
gas, reverse the instructions given in making LP
Adjustments.
WARNING
Once the conversion is complete,
locate the LP Conversion Sticker under the storage
drawer on the main bottom. When the Conversion
checks OK, fill out the LP sticker and include your
name, organization and date conversion was made.
Apply the sticker to the front frame opposite the
name and number plate behind the storage drawer
to alert others in the future that this appliance has
been converted to LP If converting back to natural
gas from LP, please remove the sticker so others
know the appliance is set to use natural gas.
MAKE THE LP GAS CONVERSION (Cont.)
Air Shutter
Orifice
Fitting
Cover
Air Shutter
Screw
Fig. 19
Air Shutter
Screw
Air Shutter
Fig. 20
