PROBLEM
“F-
A NUMBER”
FLASH
THE DISPLAY
OVEN WILL NOT WORK
BURNERS
OR
NOT
BURN EVENLY
BURNERS HAVE YELLOW
-
OR YELLOW-TIPPED
BURNER FLAMES VERY
LARGE OR YELLOW
SURFACE BURNERS
LIGHT BUT OVEN
DOES
SURFACE LIGHT DOES
NOT WORK
POSSIBLE CAUSE
If the
display flashed
and number”, you have a function error code.
If function error code appears
self-cleaning cycle, check oven door
latch. The latch handle may have been moved, even if
slightly, from the
latched position. Make sure the latch moved to
right as far as will go.
Press the
pad.
the oven to cool for one hour.
the oven
back into operation. If the failure code repeats, disconnect all power to the
range. Call for service.
Plug on range is not completely inserted the electrical outlet.
●
The circuit breaker in your
house has been tripped, or a fuse has been blown.
●
Oven controls not properly set.
●
Door left in locked position after cleaning.
●
Make sure electrical plug is plugged into a live power outlet,
●
Burner holes on the side or
the top of burner may be clogged. Remove
burners (on models with standard twin burners) or
heads (on models
with sealed burners) or burner caps on spill-proof models, and
them
with a sewing needle or twist tie. Make sure
do not enlarge the
On
spill-proof models, check electrode area
burned-on food grease.
(A) Yellow
tips on outer
Soft
flare+
service
for
gas
Normal for natural gas
●
If burner flames look
for service. Normal burner
should look
like (B) or (C), depending on the type of gas you use.
With
some yellow tipping
outer cones is normal.
●
If range is connected to
gas, check steps in the Installation Instructions.
●
The oven gas shut off valve may have accidentally been moved during
cleaning or moving.
To check the oven gas shut off valve
standard twin
models,
the
and
for
gas shut off lever at the extreme right rear corner.
To
the oven gas shut off valve
sealed burner models, remove the
storage drawer, broiler drawer or kick panel and look for the gas shut off
lever at the back of the range. On some models you may have to remove
an access
also.
●
Fluorescent bulb is loose or defective. Adjust or replace.
* Switch operating the light is broken.
for service.
(continued next page)
49
Содержание JG5P34
Страница 52: ...NOTES 52 ...
Страница 53: ...NOTES 53 ...