GE Interlogix 0150-0265A, Руководство пользователя

Страница: 5 / 18

ProBridge Gateway GE Interlogix
0150-0265A / August 2003 5
1 O
VERVIEW
The ProBridge Gateway is a product specific ProBridge translator that converts
RS485 messages between a legacy (IMPAC) RS485 network and a Kalatel
RS485 network. Its main purpose is to act as a router between a network that
uses zone addressing and a network that uses direct camera addressing. This
allows systems to utilize PTZ camera control over the TCP/IP connection with
WaveReader in systems that use camera addressing based on matrix switcher
input numbers. This product is a derivative of the standard PB3 Protocol
Converter product.
The ProBridge Gateway has the following two modes of operation:
•
The Programming mode
•
The Operating mode
In the Programming mode the installer can set up the mapping between
cameras assigned to multiplexers/ DVMRe products and dome cameras. This
allows for totally arbitrary camera mapping, i.e. DVMRe 5, camera 14 can be
mapped to camera number 983.
In the Operating mode the ProBridge Gateway will translate messages to ensure
that telemetry messages originating from Mux/DVMRe products will correctly
address the intended dome.
1.1 P
RO
B
RIDGE
G
ATEWAY
C
OMPONENTS
:
The ProBridge Gateway product includes:
(1) CBR-PB3-GW ProBridge unit.
(1) P/N 4310-0034B: RJ45 to RJ45 cable. Connects the ProBridge Gateway
RS485 Port 0 to the DVMRe Triplex RS485 port. This cable is 6’ in length.
(1) P/N 4310-0047B: RJ45 to DB9F cable. Connects the ProBridge Gateway to
RS232 Port 1 to a PC or Notebook for programming. This cable is 6’ in length.
(1) P/N 4310-0032A: RJ45 to flying leads cable. Connects the ProBridge
Gateway to the KTD-405 Keyboard and the dome cameras through the I/O
junction box. This cable is 6’ in length.
(1) P/N 4010-0007: 12VDC 120VAC Power Supply or P/N 4010-0008: 12VDC
220VAC Power Supply.
(1) P/N 0150-0265A: ProBridge Gateway User Manual.
1.1.1 I
NSTALLATION
E
NVIRONMENT
Power: Ensure that the installation site’s AC power is stable and within the rated
voltage of the external power supply. If the site’s AC power is likely to have
spikes or dips, use power line conditioning or an Uninterruptible Power Supply.