GE GUD24ESSMWW, Техническое обслуживание руководство

Страница: 41 / 81

– 41 –
The single action agitator moves the clothes back
and forth through the water while gently pulling
clothes from the top of the wash load to the
bottom of the basket. The bottom of the agitator
continues to move clothes back and forth and
circulates them back to the top of the wash load.
$JLWDWRU5HPRYDO
1. Remove the cap/softener dispenser from the
top of the agitator.
2. Use a long socket extension (approximately
17 inches long) to assist with removing the
7/16-inch hex-head bolt securing the agitator
to the shaft. The splined coupler is part of the
impeller.
Important : The impeller bolt ( Part # :
WH02X24374) should be replaced any time it
is removed for service and torqued to 100 in.
pounds.
Washer Components
The front panel is attached to the washer cabinet
by two bottom hooks and two top lock tabs.
Front Panel Removal
1. Insert a putty knife between the washer top
and the front panel 4-1/8 inches from each
side.
2. Press in on each lock tab and pull the top of
the front panel forward.
3. Lift the front panel and remove it from the
bottom two hooks.
4-1/8 inches
6LQJOH$FWLRQ$JLWDWRU
WARNING: Sharp edges may be exposed when
servicing. Use caution to avoid injury. Wear
Kevlar gloves or equivalent protection.
Front Panel