GE Druck PACE1000, Инструкции по безопасности и руководство пользователя

Страница: 3 / 148

[EN] English 2 K0467 Revision A
1 Introduction
The PACE Pressure Indicator measures both pneumatic and hydraulic pressures and displays, on a
colour touch-screen, the measured pressure and instrument status. The touch-screen enables
selections and settings in measuring modes. The instrument can be operated remotely through
communication interfaces.
1.1 Safety
The manufacturer has designed this equipment to be safe when operated using the procedures
detailed in this manual. Do not use this equipment for any other purpose than that stated, the
protection provided by the equipment may be impaired.
This publication contains operating and safety instructions that must be followed to make sure of
safe operation and to maintain the equipment in a safe condition. The safety instructions are
either warnings or cautions issued to protect the user and the equipment from injury or damage.
Use qualified* technicians and good engineering practice for all procedures in this publication.
1.2 Pressure
Do not apply pressures greater than the maximum working pressure to the equipment.
1.3 Toxic Materials
There are no known toxic materials used in construction of this equipment.
1.4 Maintenance
The equipment must be maintained using the procedures in this publication. Further
manufacturer’s procedures should be done by an authorized service agents or the manufacturer’s
service departments.
1.5 Technical advice
For technical advice contact the manufacturer.
*A qualified technician must have the necessary technical knowledge, documentation, special test
equipment and tools to carry out the required work on this equipment.
1.6 General Specification
Display LCD: Colour display with touch-screen
Operating temperature 10°C to 50°C (50° to 122°F)
Storage temperature -20°C to 70°C (-4° to 158°F)
Ingress protection IP20 (EN60529)
Operating humidity 5% to 95% RH (non-condensing)
Vibration MIL-PRF-28800 Type 2 class 5 style E/F
Operating altitude Maximum 2000 metres (6560ft)
EMC EN 61326
Electrical safety EN 61010-1, UL61010-1, CSA 22.2, No. 61010-1 and IEC61010-1
Power adaptor Input range: 100 - 240VAC, 50 to 60Hz, 660mA. Installation category
II
Pressure safety Pressure Equipment Directive - class: sound engineering practice
(SEP) for group 2 fluids.
Pollution degree 2
Operating Environment Indoor use only. Not rated for use in potential explosive
atmospheres.