10
Replace the PSU cover(s) and secure using the mounting
screws.
Note:
When installation is complete, all wiring and
connectors shall be totally enclosed.
9
To terminate a mechanical run take the end cap from
the starter luminaire or starter kit and clip down onto the
last bridge.
Locate the black (line) and white (neutral) wires on the
PSU. Pull the wires out of the box to have good access.
9
7
Connecting a Unit to AC Circuit #1 or AC Circuit #2
Connect the black (line) and the white (neutral) wires
of the PSU to the AClines similarly colored wires using
the push-inwire nuts.
Connect the black (line) of the PSU with the brown (line)
AC wire using the push-in wire nut. Connect the white
(neutral) wire of the PSU with the brown/white (neutral)
ACwire using the push-in wire nut.
AC Circuit #1 Connections
AC Circuit #2 Connections
8A
8B
PSU
AC Circuit #2
AC Circuit #1
AC Circuit #2
AC Circuit #1
Black and
whitewires
Dimming
