T5 FLUORESCENT CABINET LIGHTING
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION
LEAVE A COPY FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE
FEATURES
•
Polycarbonate bodied inter-connectable strip light featuring energy saving electronic control gear.
•
T5 lamp supplied (4000°K)
•
Multiple interconnection options
•
On/off switch allowing independent control of interconnected fittings.
IMPORTANT INSTALLATION INFORMATION
•
Installation should be carried out in accordance with the latest edition of the I.E.E. Wiring Regulations
(BS7671). If in doubt, consult a qualified electrician.
•
These luminaires are for indoor use only, under shelves, cabinets, pelmets bookcases and cabinets.
•
Maximum Input Voltage– 240VAC 50Hz
•
Ensure that ALL electrical connections are tight with no loose strands.
•
Before commencing installation or maintenance, ensure electricity is switched off at the mains.
•
100W maximum load when interconnecting fittings.
•
Suitable for mounting on normally flammable surfaces.
•
Suitable for direct mounting on or in cabinets or furniture.
IMPORTANT USER INFORMATION
•
Replace failed lamps immediately. Allow the lamp and fitting to cool before replacing lamp.
•
Check the lamp information label to ensure that correct lamp type and wattage is fitted.
•
This luminaire is not dimmable.
INSTALLATION INSTRUCTIONS
1.
Use the luminaire as a template to determine the spacing between fixing brackets.
2.
Screw the brackets to the mounting surface with the screws provided. Beware of electric cables, water
pipes etc.
3.
Clip the luminaire into the brackets.
4.
Luminaires can be used singly or can be linked together end to end or by using interconnection leads
(available separately) if required. To connect together remove the plastic end cap and connect end to
end or use an interconnection lead to space apart. Please note: These T5 luminaires can be connected
together up to a maximum load of 100W, i.e. 16 x AU-T506S, 12 x AU-T508S , 7 x AU-TT513S,
4 x AU-TT521S etc.
