GE Centricity SP1001, Руководство пользователя

Страница: 42 / 60

42
5011A EN 20020315
Reading the identification data of a cassette
(Dedicated configuration only)
In the dedicated configuration, the identification data stored in the memory chip
of the cassette can be read via the Centricity™ SP1001.
To read the identification data of a cassette:
1 Check that the Centricity™ SP1001 is ready for operation:
• the Centricity™ SP1001 must display the operator main screen with ‘Ready’
status, e.g.:
• the status indicator at the top of the Centricity™ SP1001 must be green and be lit
constantly.
❖
The Centricity™ SP1001 is operational if the status field equals ‘READY’,
even if status messages of the destination are shown (e.g. ‘QS not ready’).
2 In the ID Software on the ID Station, select the mode for reading cassettes.
Refer to the User manual of the ID Software.
The display of the Centricity™ SP1001 will read:
QS not ready READY
SP1001
Status field
BUSY
DIRECT ID
READ CASSETTE MODE
Enter cassette or press
to cancel
SP1001
5011 A UM EN CR SP1001.fm Page 42 Friday, March 15, 2002 4:11 PM