29
2. Digital Mode
As opposed to the Current Loop Mode, the DNGP also has Digital Mode. In navigating the Run-Time
Screen the only noticeable difference is the display of the Top Variable Feedback Bar. In this case there
is no bar, only the current active input is displayed. All button commands have the same function as in
Current Loop Mode.
Cycles
1,875
Control
Idle
Feedback
❚
❚
❚
Deadband 1.5%
♦
N
CTRL = Using Digital Inputs
MAN = Under Manual Control
PGM = Under Program Control
Idle = Input is Idle
Open = Open input is Active
Close = Close Input Active
FAULT = Both Inputs Active
A = Automatic, Analog
a = Automatic, Digital
M = Manual, Analog
m = Manual
P = Program Control
S = Standby
- = Idle
d = Decreasing Current
D = Decreasing Current, Bypass Limit
i = Increasing Current
I = Increasing Current, Bypass Limit
H = Halted
W = Waking (Solenoids on, Not Yet Moving
M = Moving
C = Coasting
= Full Range, Standard
= Split Range, Standard
= Full Range, Learned
♦
= Split Range, Learned
