GE Appliances Geospring GEH50DEEDXX, Руководство пользователя и инструкции по установке

Страница: 21 / 50

21
Fault codes.
GEAppliances.com
fault Code
Displayed Condition Action
f-A T4 Not Rising Call service
f-b Discharge Temp Not Stable Call service
f-C Evaporator Not Frost Free Call service
f-D Superheat Too Low Call service
f-E Discharge Temperature Above Limit Call service
f-f Electronic Expansion Valve Out of Range Call service
f2 T2 Tank Temperature Sensor Failure Call service
f-3 Compressor Failure Call service
f-4 Fan Failure Call service
f-5 T3a Sensor (Evap inlet temperature) Failure Call service
f-6 T3b Sensor (Evap outlet temperature) Failure Call service
f-7 T4 Sensor (Compressor outlet) Failure Call service
f-8 T5 Sensor (ambient temperature) Failure Call service
f-9 Lower Heating Element Failure Call service
f-10 Upper Heating Element Failure Call service
f-11 Dry Tank Fault See page 16
f13 Stuck Key Fault Call service
f15 DataFlash Fault Call service
bAd linE The voltage is too low at power-up See page 16
Note: If your unit shows “PS” on the display when trying to adjust the temperature, this is not a
fault code. “PS” indicates that the unit is operating with the ACM module and is in Power Saver
mode. See page 10 for details.