GE Allegro, Руководство по установке

Страница: 28 / 44

User Programing Menu Items
22
Codes (1st Tier)
The CODES menu lets you define security codes for the Allegro system. The CODES menu con-
tains the following 2nd tier menus, or codes:
• MANAGER
• MAINTENANCE
• PRIMARY
• USER, 2, 3, 4
MANAGER (2nd Tier) (CODES—)
Note
This code will only be dis-
played in user programming if
the manager code was used to
enter user program mode.
(Default = none, Parameters = 4 digits, 0 to 9)
The manager code functions the same as the primary code within the user programming menu,
and can arm or disarm the system.
¾
To program/change Manager Code:
1. Enter the manager code. The display shows
CODES
.
2. Press # . The display shows
MANAGER
.
3. Press # to display the current code (if any).
4. Press # , enter the desired code and then press # .
¾
To delete Manager Code
Š
Press # twice. Once to delete the code and again to accept the command.
MAINTANANCE CODE (2nd Tier) (CODES—)
Note
This code will only be dis-
played in user programming if
the manager code was used to
enter user program mode.
(Default = none, Parameters = 4 digits, 0 to 9)
The maintenance code is to be used in conjunction with the apartment manager keychain
touchpad. When a maintenance person needs access to a site protected by an Allegro, he can
press disarm on the apartment manager keychain touchpad, enter the premises, then enter the
maintenance code at the panel to disarm the system.
¾
To set the Maintenance Code:
Š
Press # , enter the desired code and then press # .
¾
To delete Maintenance Code
Š
Press # twice. Once to delete the code and again to accept the command.
PRIMARY (2nd Tier) (CODES—)
(Default = 1234, Parameters = 4 digits, 0 to 9)
The primary code performs all system operations and user programming.
¾
To set the Primary Code:
1. Press # to display the current code.
2. Press # , enter the desired code and then press # .
USER 2, 3, 4 (2nd Tier) (CODES—)
(Default = none, Parameters = 4 digits, 0 to 9)
User Codes performs arming and disarming functions. The user codes cannot directly bypass
sensors or program the primary code. The system allows up to 3 user codes (user 2 - 4).
¾
To program/change User 2, 3, 4 Code:
1. Press # to display the current user code (if any).
2. Press # , enter the desired user code and then press # .
¾
To delete User 2, 3, 4 Code
Š
Press # twice. Once to delete the code and again to accept the command.