Installer Programming Menus
19
Reports (1st Tier)
The REPORTS menu allows you to set up the Allegro panel to perform the following central sta-
tion reports:
•
AC FAIL
•
LOW CPU BATTERY
•
PHONE TEST
DEMO KIT
(2nd Tier)
(OPTIONS—)
(Default = off)
This setting determines whether the panel is used for a standard installation (Off) or as a demo
kit (On). The demo kit (80-702) will include:
•
Allegro panel
•
SAW D/W
•
2 button key fob
•
PIR plastic (motion sensor)
•
DTIM plastic
•
9V alkaline battery with battery strap
•
Soft-sided case
•
Demo kit Instructions
The following contains the modifications to Allegro Software that embody the Demo Kit Soft-
ware. All features work exactly as on the production version except those listed here.
¾
To put the panel into demo kit mode:
1. Press # to turn Demo Kit on.
2. Clear the panel memory (see “Clear Memory (1st Tier)” on page 21)
The power-up defaults are the same as the production version except the following:
Sensor Text
•
ZONE 1 = KEYCHAIN REMOTE
•
ZONE 2 = FRONT DOOR
Options
•
Demo kit = On
•
CPU low battery = Off
•
Quick arming = On
•
Panel panics = On
•
Entry delays = 8 seconds
•
Exit delays = 8 seconds
•
Siren time-out = 1 minute
•
Trouble beeps = Off
•
Panel tamper = Off
All program items can be changed by the operator but will return to defaults upon a memory
clear execution.
Behavioral Differences
A transformer is not required for the Demo Kit. AC power tests will never be performed and
AC power failure will never be shown.
•
The prompt for setting time after a power cycle will never be shown.
Содержание Allegro
Страница 6: ...iv ...
