GE AL-1103, Руководство пользователя

Страница: 54 / 76

Alliance System
User Manual
48
Table 23 lists the create or change user options.
Table 24 lists the start auto disarm test options for each user flag display.
9. If the user number that you are programming is higher than 1000, and user flags are not displayed in
your system, then all the options available have been programed and the display will return to step 1.
10. If the system has been programmed so that users do not have name files, or if you are programming a
user higher than 200 and user flags are not displayed, see Entering a user pin code on page 51. With
file names, see , Entering a user name on page 49.
11. If your system is programmed to assign special user flags to the users, they display in sequence.
12. If the user number that you are programming is higher than 1000, then all options available have been
programmed and the display returns to step 1.
Note: You cannot program a user number that already exists.
Table 23. Create or change a user options
Option Action
Select the number of the alarm group to be issued to this user. Enter the alarm group number and press ENTER .
Display the list of alarm groups that you can issue a user (if any). Press MENU* .
Move to the next display. Press ENTER .
Exit the menu option and return to the original display. Press CLEAR .
Table 24. Start auto disarm test options for each user flag display.
Option Action
Change YES to NO, or NO to YES, and display the new setting. Press MENU* .
Save the displayed setting and move to the next user flag
display. Press ENTER .
Save the displayed setting, skip the remaining user flags, and
move to the next step. Enter 0 and press ENTER .
Exit the menu option from Table 25 , and return to the original
display.
Press CLEAR .