GE AL-1103, Руководство пользователя

Страница: 47 / 76

Chapter 2
Alliance system menu
41
System menu option 12, Test zone
Use this menu to test if an individual zone is operating correctly.
Note: The test must be carried out within a predetermined time. If the test is not completed within this time, the option is
exited.
Test a zone
To test a zone, do the following:
1. Press MENU* ( Figure 1 ) , enter your user
PIN code, and press ENTER
( Figure 1 ).
2. Enter 12 (for menu 12) and press ENTER .
The display shows the test a zone window
(
Figure 45 ).
Note: If the zone is bypassed when a test is
requested, the system unbypasses the
zone, conducts the test, then returns the
zone to bypassed.
Figure 45. Test a zone
3. Enter the zone number for one of the
following four responses and press ENTER .
3a. The zone is normal ( Figure 46 ).
Figure 46. Normal test zone
3b. The zone is active ( Figure 47 ).
Figure 47. Active test zone
3c. There is a faulty condition due to cable
tamper. The cabling to the zone shows an
OPEN circuit (
Figure 48 ).
Figure 48. Cable tampering, open
Test Individual Zone:
Zone No:
NORMAL STATE on 12, Roller Door
Press ENTER
ACTIVE on 12, Roller Door
Press ENTER
OPEN on 12, Roller Door
Press ENTER