Alliance System
User Manual
44
Table 22
lists the Start auto disarm test options.
Note:
Untested zones must be manually tested (see
System menu option 12, Test zone
on page 41) to verify their operation.
System menu option 14, Program users
Use this menu to delete, display, or create a user record.
Your system may be programmed to require two authorized users to enter this menu. Also, your assigned alarm
group might not allow you to program PIN codes. If it does allow you to use this function, there might still be
restrictions on which alarm groups you are allowed to assign or edit.
The user record includes the following details about the user:
•
User name
•
Alarm group, which determines the user’s areas and alarm control functions.
•
Door group, which determines the doors to which the user has access.
•
Floor group, which determines the floors to which the user has access.
•
Name (some users only).
•
PIN code (some users only).
The maximum quantity of users that can be programmed for an Alliance panel depends on the panel's memory
configuration. In addition to the total number of users, the panel's memory configuration also affects the
quantity of users with names and PIN codes. Contact your system installer for details of your system's
configuration.
The system’s capabilities are as follows:
•
No memory expansion:
50 Users
•
No memory expansion with SIUM:
50 Users (see note)
•
1 MB expanded memory:
11,466 Users
•
1 MB with SIUM:
2000 Users (see note)
•
4 MB IUM:
17,873 Users (see note)
•
8 MB IUM:
65,535 Users (see note)
Note:
Software and Expanded intelligent user memory (IUM) have extended capabilities and options. Contact your system
installer for details.
Table 22. Auto disarm test options
Option
Action
Display the description of the selected zone (when displayed as a
list of numbers).
Enter the zone number and press
ENTER
.
Display the remaining untested zones (if any). Move to the test
completed/not completed displays, if there are not more
untested zones to display.
Press
ON/NEXT
.
Move to the camera test or test completed/not completed
display.
Press
ENTER
.
Exit the menu option and return to the original display.
Press
CLEAR
.
Содержание AL-1103
Страница 1: ...Alliance System User Manual ...
Страница 28: ...Alliance System User Manual 22 ...
Страница 72: ...Alliance System User Manual 66 ...
Страница 76: ......
