GE AIR F24, Руководство по обслуживанию

Страница: 32 / 48

－
32
－
Operating Procedures / Photos
Disassemble Front Panel Assy
Screw off the screws at the front and at the
two sides. Remove the front panel sub-assy.
(Fig 8-31) Front
Panel
Sub-assy
Screw
(Fig 8-31)
Disassemble Guide Louver Sub-assy
First remove the guide louver from the fitting
position of the guide louver support, then
remove the two ends of the guide louver from
the fitting position of the swing motor. (Fig
8-32)
(Fig 8-32)
Disassemble Water Tray Sub-assy
Use screwdriver to screw off the nut with
washer at the middle of water tray. (Fig 8-33)
Use screwdriver to screw off the two side
screws of the auxiliary water tray. Pull the
auxiliary water tray and the water tray upward
to remove them. (Fig 8-34)
Disassemble Mounting Plate
Sub-assy of Swing Louver
Water Tray
Nut with
Washer
(Fig 8-33)
Auxiliary
Water Tray
Screw
(Fig 8-34)
Use screwdriver to screw off the screws at
both ends of the mounting plate sub-assy of
swing louver. Take the mounting plate
sub-assy of swing louver apart from the guide
louver support. (Fig 8-35)
Screw
(Fig 8-35)