RTfino/RT3200 Advantage–II/RT–x200 SERVICE MANUAL
GE MEDICAL SYSTEMS
P9030GX
INSTALLATION AND REPLACEMENT
3–4
REV 11
3–4 UNPACKING RTfino/RT3200 Advantage–II/RT–x200 COMPONENTS
Note
Check the shipping container for special instructions. Verify that the container is intact. In some
cases a secondary container may be used. If so, ask the carrier for unpacking instructions.
3–4–1 Normal Unpacking Procedure
1.
Leaving the bottom of the container intact, cut the plastic bands. (See Illustration 3–0)
2.
Pull the cap up and off of the container.
3.
Pull out the three plastic joints by hand or with pliers; turn the plastic joints counterclockwise and pull.
4
Open the outer sleeve and cut the corners of the bottom tray.
5.
Remove protective packing material; save it for future shipments, if required.
6.
Preferably with a helper, carefully roll the RTfino/RT3200 Advantage–II/RT–x200 off its shipping platform.
CAUTION
The RTfino/RT3200 Advantage–II/RT–x200 System weighs approximately 86kg (190lbs). Be
prepared for a surge as the RTfino/RT3200 Advantage–II/RT–x200 is rolled off of its shipping
platform.