GE Security VSR-300 Скачать руководство пользователя

Страница: 70 / 78

VSR

User Manual

Upgrading the VSR

To properly upgrade the VSR the following preconditions must exist:

1. The Flash upgrade file and path. This file is obtained by calling GE Security Technical Support at

1-888-437-3287. When calling, please have the following information available:

•

The model number of the product.

•

The serial number and revision of the product

•

The current firmware version.

•

The date purchased.

•

Symptoms of the unit that might require upgrade.

2. The VSR unit connected to a PC equipped with Microsoft Internet Explorer version 5.5 or later via

Ethernet cable.

3. The IP address of the VSR.

4. Please exit all non-essential software on the PC.

5. Ensure that the VSR is not currently recording.

Follow the steps below to Upgrade the VSR:

1. Launch your browser software (Microsoft Internet Explorer 5.5 or later).

2. Enter the IP address of the VSR in the address field of the browser

3. The

Enter Network Password

window should appear. Enter the correct Username and Password in

their respective fields. (The default username is

admin

and the password is

admin

. It is recommended

that the defaults be changed as soon as possible). Click the

button. The VSR home page should

appear.

4. Click on the

Upgrade

link.

5. Navigate to the upgrade file using the

Browse button

or type in the correct path and filename. Click

on the

Send File

button.

6. Click on the Confirm Button. A progress bar will appear. PLEASE WAIT FOR THE PROGRESS

BAR TO FINISH,

THEN WAIT FOR CONFIRMATION!

Click on the Reboot button to restart the

unit for changes to take effect. If unsuccessful, download the flash file again and retry steps 1-6.

Содержание VSR-300















































































Результаты поиска

Содержание VSR-300

Отзывы:

Похожие инструкции для VSR-300

Бренды по названию

Популярные бренды

GE Security VSR-300, Руководство пользователя

Результаты поиска

Содержание VSR-300

Отзывы:

Похожие инструкции для VSR-300

Бренды по названию

Популярные бренды