VSR
User Manual
36
2. Press the
Pause
button to select the desired character set.
3. Use the
Arrow Buttons
to navigate the cursor in the camera title.
4. Use the
Arrow Buttons
to navigate the cursor in the character bank.
5. Press the
Rec UP
button to insert a blank character or press the
Rec Dn
button to insert the selected
character.
6. When finished editing the title, press the
Enter
button to exit the edit mode.
7.
Save changes and exit the menu:
Select
[OK]
, then press the
Enter
button.
8.
Exit the menu without making changes:
press the
Menu
button, or select
[CANCEL]
, then press
the
Enter
button.
Main Menu
/
Display Settings
Figure 37. The display settings menu
Use this menu to specify what status information will be displayed on the output monitor. Select On or Off, for
the following items.
•
The current time and date.
•
The remaining amount of time before the hard disk runs out of record space.
•
The time and date of the last alarm.
•
The Record or Playback Speed.
•
During Playback, the time and date the recording was made.
•
The Camera title.
Main Menu
/
Display Settings
/
Current Time / Date
To display the current Time and Date near the upper right hand corner of the output monitor, select
ON
. Use the
Arrow buttons
to select
On
or
Off
.
Press the
Enter
button to confirm the selection and exit the menu, or press the
Menu
button to exit the menu
without making changes.
Содержание VSR-300
Страница 1: ...GE Security VSR User Manual ...
Страница 17: ...13 Figure 6 Typical network setup ...
Страница 78: ...VSR User Manual 74 ...