GE Security NX-592E, Руководство по установке

Страница: 7 / 20

5
10. Click Next . The Confirmation screen will appear. Review the customer information. If you need to
change any of the information, click the Edit link next to the field you want to update.
11. Click Done . The Account Creation Successful screen will appear. Click View and Print Welcome
Letter . Print two copies of the welcome letter; one for the customer and one for your records. The
letter includes the customer’s login, temporary password, and instructions on how to get started.
Also, a confirmation message is sent via e-mail to the address entered in Step One: Customer
Information . The message contains a user confirmation number to be entered during initial log on to
the Alarm.com website.
Note: If you leave the Account Creation Successful screen without printing a welcome letter, you must click on the
Customer Tab, choose the Customer Support tab, and search for and click on the customer that needs a New
Welcome Letter. On the customer information page that appears, select the New Welcome Letter tab in the
Customer Support Option panel on the left-hand side.
If the customer does not receive the confirmation e-mail, you may send a new confirmation e-mail by
selecting
Resend Confirmation Number in the Customer Support Options panel.
Programming the number of zones into the gateway
This section describes how to program the number of zones into the gateway.
Once the account is created, log on to the Alarm.com Dealer website at:
https://www.alarm.com/dealer
Click on the Customers Tab, and then click on the Customer Support subtab. Enter the name of the account
in the Customer Search field and click on Submit Search . Then click on the customer name in the Search
Results list below the Customer Search area. When the account information appears, click on the Sensor List
link on the left side of the page under Customer Support Options . Enter the number of installed zones for the
customer’s NX panel and click Submit .
Note: If the panel was not powered up after the account was created, no zone list will appear on this page. The command to
set the number of zones will be sent to the panel right away if the panel is powered up, or later when the panel powers
up if it has not already powered up.
CAUTION: Unlike Concord and Simon, the Alarm.com gateway cannot learn the number of zones from the NX panel.
By default, the gateway will assume that eight zones are installed. If the numbers of zones is different, you
will have to send a command to the panel via the
Customer Support page of the Alarm.com Dealer website.