GE Interlogix Digiplex IV Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 76

background image

Digiplex IV User Manual

System Programming

1034169B / December 2003

39

4.2.4.5 P

ROGRAMMING

V

IDEO

L

OSS

The video loss card provides its own visual and audible alerts. If a video loss card is installed, monitor 16
becomes dedicated to scanning for and reporting video loss conditions. Monitor 16 is no longer available
as a primary, alternate, or spot monitor. Monitor 16 is blank with a green background when there are no
video loss conditions to report. The background turns red when reporting a video loss condition. The red
warning screen displays the first seven camera sites that are reporting video loss. Additional sites
reporting video loss are held in a queue and are displayed on the red screen after alarms associated with
the first seven video loss reports are cleared.

The video loss card has an attached speaker. The speaker (when the audio alarm is enabled) sounds an
audible alert when video loss is detected.

The video loss card also has an
attached relay. When the relay alarm
is enabled and video loss is detected,
the relay closes and provides a
secondary alert through an auxiliary
alarm device (e.g., strobe light or
siren). The auxiliary alarm device is
connected to the terminal strip on the
back of the KTD-440 chassis (see
Figure 21). The relay alarm can also
be used to trigger a recording device.

Note:

The relay is a dry contact.

Figure 21. Relay alarm connections for the video loss card in the KTD-440 chassis

Note:

Example user content that has been

added to menus is highlighted.

Note:

To receive context-sensitive help at any point during the programming, press the

alarm

key.

1)

At the A-0 main menu, press the

6

key to access the J-0 menu to program the video loss

parameters and view the video loss reports.

A-0     MAIN MENU     MON 001
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BNC INPUT MAPPING        -1-
GROUP SWITCHING           -2-

MEMORY MANAGEMENT        -3-
MONITOR SETUP             -4-
TITLES                    -5-
VIDEO LOSS                -6-

ALARM=HELP / SEQ=EXIT

J-0      VIDEO LOSS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CURRENT LOSS REPORT       -1-
CURRENT ALL CAMERAS       -2-

VIDEO LOSS SETUP          -3-
AUDIO ALARM - ENABLED     -4-
RELAY ALARM - ENABLED     -5-

ALARM=HELP / SEQ=EXIT

Steps continue on the next page.

«
...
37
38
39
40
41
...
»

Содержание Digiplex IV













































































Отзывы:

Нет отзывов

Похожие инструкции для Digiplex IV

Бренд: AAVARA Страницы: 23

Бренд: X10 Страницы: 20

Бренд: Maipu Страницы: 21

Бренд: Maico Страницы: 56

Temperature SWICHGAGE SPL

Бренд: Murphy Страницы: 4

Бренд: West Mountain Radio Страницы: 10

Бренд: Maiwe Страницы: 5

Бренд: Hama Страницы: 56

ServicePlus S11

Бренд: Horstmann Страницы: 8

ScatterBox POE308

Бренд: System Q Страницы: 2

Бренд: Lantech Страницы: 27

SW-HBT-C6POE-16X16E

Бренд: Avenview Страницы: 19

Бренд: Ubiquiti Страницы: 24

Бренд: Black Box Страницы: 2

Бренд: Qlogic Страницы: 4

Бренд: VICOR Страницы: 31

Бренд: Johansson Страницы: 16

Бренд: SMC Networks Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды