Ge Est QS4, Техническое справочное руководство

Страница: 79 / 138

Programming instructions
QS4 Technical Reference Manual 4.21
Setting up an Output Group
Before you begin Before you begin, you should complete an Output Group
Programming Worksheet (Figure 4-8) for each Output group.
Keep a copy for your records.
To set up an Output Group:
1. On the control panel, press Menu.
2. Choose Login then enter the password required for Level 4
access.
3. Choose Program > Configure > Output.
4. To program a new Output group, choose Add.
— or —
To edit an existing Output group, choose Edit, select the
group from the pick list, and then press Enter.
5. Add the responses.
6. After you finish entering the responses, you should review
them to make sure they are correct.
Adding a response that activates an
output circuit 1. Choose Responses.
2. Choose Active or Trouble
3. Choose Add > Relay, then enter the circuit address where
CC is the card number and DDD is the circuit number.
4. Choose the activation setting.
5. Choose Exit > Save Edits.
Adding a response that activates a
delay
1. Choose Responses.
2. Choose Active or Trouble.
3. Choose Add > Delay.
4. Choose Delay Type, then choose when to initiate the delay
response.
5. Choose Delay Time, press Del four times, and then enter
how many seconds you want the delay to last.
6. Choose Exit > Save Edits.
Technical Manuals Online! - http://www.tech-man.com