Ge Est QS4, Техническое справочное руководство

Страница: 66 / 138

Programming instructions
4.8 QS4 Technical Reference Manual
Step 10:
AutoLoop the loop controller
cards
Run the AutoLoop utility on each loop controller installed in
the control panel.
Caution: When the system reboots, the loop controller
reinitializes the loop. If you attempt to run the AutoLoop utility
during this time, you could corrupt the project database.
1. On the control panel, press Menu.
2. Choose Login then enter the password required for Level 4
access.
3. Choose Program > Configure.
If the loop is still initializing, do not proceed until loop
initialization has finished.
4. Choose Cards > Edit, then enter the card number for the
loop controller.
5. On the Edit Cards menu, choose AutoLoop.
6. If the number of detector and module addresses on the
display match the number installed on the loop, press
Enter to accept, then wait while the database is updated.
If not, press Del to cancel. You must correct the problem
before continuing with this loop.
7. On the SLIC menu, choose Exit.
8. For each additional loop controller, repeat steps 4–7.
9. Choose Exit.
Step 11:
Saving the project database
Tip: Only Save and Sync after you
have finished programming the control
panel and you want to update the
project databases in the remote
annunciators.
At this point, you have configured the project database for a
general alarm system. Refer to Table 4-2, Table 4-3 and
Table 4-4 for initial system settings.
If you want to accept the general alarm system configuration,
choose Save and Sync.
If you want to make changes to the system configuration,
choose Save, and then make your changes. See
Customizing
the system configuration . After making all of your changes:
1. Press Menu.
2. Choose Login then enter the password required for Level 4
access.
3. Choose Program > Configure > Exit.
4. Choose Save and Sync.
Note: If the local AHJ requires a hard copy of your site
programming, use the QuickStart Configuration Utility to
retrieve the database from the panel and print the required
information.
Technical Manuals Online! - http://www.tech-man.com